HEWLETT-PACKARD CO BOISE DIV -- 92298A, EP-E CARTRIDGE (TONER CARTRIDGE) -- 6850-01-398-2396
=====================  Product Identification  =====================

Product ID:92298A, EP-E CARTRIDGE (TONER CARTRIDGE)
MSDS Date:08/01/1993
FSC:6850
NIIN:01-398-2396
=== Responsible Party ===
Company Name:HEWLETT-PACKARD CO  BOISE DIV
Address:11311 CHINDEN BLVD
Box:NONE
City:BOISE
State:ID
ZIP:83707
Country:US
Info Phone Num:208-323-6000
Emergency Phone Num:208-323-6000
CAGE:18660
=== Contractor Identification ===
Company Name:AMERICAN LASER INC
Address:1007 RIPLEY ST
Box:City:SILVER SPRING
State:MD
ZIP:20910
Country:US
Phone:301-588-4850
CAGE:0S0F8
Company Name:HEWLETT-PACKARD CO  BOISE DIV
Address:11311 CHINDEN BLVD
Box:City:BOISE
State:ID
ZIP:83714
Country:US
Phone:208-396-6000
CAGE:18660

=============  Composition/Information on Ingredients  =============

Ingred Name:STYRENE-ACRYLIC TERPOLYMER
CAS:9017-48-5
Fraction by Wt: 45-55%

Ingred Name:IRON OXIDE
CAS:1317-61-9
Fraction by Wt: 45-55%
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS N0T ACCESSIBLE UNLESS
    CARTRIDGE IS FORCED 0R BROKEN INTO. NO DATA AVAILABLE FOR CHRONIC
    EFFECTS OF OVEREXPOSURE.
Explanation of Carcinogenicity:THE INGREDIENTS LISTED ARE NOT LISTED ON
    THE LATEST NTP, IARC OR OSHA LISTS.
Effects of Overexposure:INHALATION:GASPING. DO NOT BREATHE DUST. EYE:NO
    SPECIFIC HAZARD IS KNOWN TO CANON. HOWEVER ANY MATERIAL CONTACTING
    EYE MAY BE IRRITATING. SKIN:LOW HAZARD FOR INDUSTRIAL HANDLING.
    INGESTION:NOT TYPICAL  ROUTE OF ENTRY DURING ORDINARY USE.
Medical Cond Aggravated by Exposure:MFR GAVE NO INFORMATION ON MSDS.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE FROM EXPOSURE. EYE:IN CASE OF EYE CONTACT.
    FFLUSH EYE W/PLENTY OF WATER. IF IRRITATION PERSISTS CONTACT A
    PHYSICIAN. SKIN:WASH W/SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
    IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
    OR HANDLING. AVOID INHALATION. SWEEP MATERIAL ONTO PAPER & PLACE IN
    FIBER DRUM.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
    AWAY FROM CONTACT W/OXIDIZING MATERIALS.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MFR GAVE NO INFORMATION ON MSDS.
Ventilation:GOOD GENERAL SHOULD BE SUFFICIENT
Protective Gloves:NONE REQUIRED
Eye Protection:NONE REQUIRED
Other Protective Equipment:NONE
Work Hygienic Practices:MFR GAVE NO INFORMATION ON MSDS.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:SOLID
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER W/SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLI

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:MFR GAVE NO INFORMATION ON MSDS.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
    COMPLIANCE W/FEDERAL, STATE & LOCAL REGULATIONS. CARTRIDGE MAY BE
    CONSIDERED PLASTIC WASTE. THIS CARTRIDGE IS COMPOSED OF PLASTICS &
    METALS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.