CANON U S A INC -- F41-8001-000 NPG-4 TONER BLACK -- 6850-01-383-0227 
=====================  Product Identification  =====================

Product ID:F41-8001-000 NPG-4 TONER BLACK
MSDS Date:06/01/1996
FSC:6850
NIIN:01-383-0227
=== Responsible Party ===
Company Name:CANON U S A INC
Address:ONE CANON PLAZA
City:LAKE SUCCESS
State:NY
ZIP:11040-1113
Country:US
Info Phone Num:516-488-6700/516-328-5600
Emergency Phone Num:516-488-6700/800-424-9300(CHEMTREC)
CAGE:1BA63
=== Contractor Identification ===
Company Name:ACCESS IMAGING CORP
Address:505 E VALLEY LN
Box:City:ARLINGTON HEIGHTS
State:IL
ZIP:60004-3131
Country:US
Phone:847-222-0600
CAGE:08HF7
Company Name:CANON USA INC
Address:ONE CANON PLZ
Box:City:NEW HYDE PARK
State:NY
ZIP:11042
Country:US
Phone:516-328-5000; 5600
CAGE:08YZ7
Company Name:CANON USA INC
Address:ONE CANON PLAZA
Box:City:LAKE SUCCESS
State:NY
ZIP:11042
Country:US
Phone:516-328-5600
CAGE:1BA63
Company Name:CANON USA INC
Address:2110 WASHINGTON BLVD SUITE 150
Box:City:ARLINGTON
State:VA
ZIP:22204-5799
Country:US
Phone:703-807-3191
CAGE:4J871

=============  Composition/Information on Ingredients  =============

Ingred Name:IRON OXIDE
CAS:1317-61-9
Fraction by Wt: 40-50%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3

Ingred Name:STYRENE ACRYLATE COPLOYMER
Fraction by Wt: 35-45%
Other REC Limits:NONE RECOMMENDED

Ingred Name:STYRENE POLYMER
Fraction by Wt: 5-15%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:LOW HAZRD FOR RECOMMENDED HANDLING.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY
    CLASSIFICATION:IARC/ACGIH/NTP/OSHA:NONE.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:IF SYMPTOMATIC MOVE TO FRESH AIR.SYMPTOMS PERSIST GET
    MED ATTN.EYE:ANY MATL THAT CONTACTS EYE SHOULD BE WASHED OUT IMMED
    W/WATER.SYMPTOMS OCCUR GET MED ATTN.SKIN:WASH W/SOAP/WATER.SYMPTOMS
    OCCUR  GET MED ATTN.INGEST:DRINK 1-2GLASSES OF WATER.SEEK MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE (CO2), DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TONER MATL LIKE MOST ORGANIC MATL IN
    POWDER FORM IS CAPABLE OF CREATING A DUST EXPLOSION.NON-FLAMM
    SOLID(ACCORDING TO TEST METHOD OF 16CFR1500.44).

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP MATL ONTO PAPER & PLACE IN FIBER
    CARTON.DONT USE VACUUM CLEANER TO CLEAN-UP SPILLS OF POWDERED
    TONER.THE FINE PARTICLES CAN CAUSE A FIRE OR EXPLOSION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING DUST.USE W/ADEQUATE
    VENTILATION.KEEP FROM CONTACT W/OXIDIZING MATLS.MINIMIZE DUST
    GENERATION & ACCUMULATION.
Other Precautions:REFER TO PAMPHLET #654 "PREVENTION OF FIRE/DUST EXPLO
    IN CHEM,DYE,PHARMAC,PLASTICS INDUST".USE ADEQUATE VENTI.KEEP CNTNRS
    CLSD.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD VENTILATIN (TYPICALLY 4-6 ROOM VOLUMES PER HR)SHOULD
    BE USED.VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS.
Protective Gloves:PROL/REP SKIN CONTACT IMPERV GLOVES
Eye Protection:GODD INDUST HYG PRACT TO MIN EYE CONTACT
Other Protective Equipment:WASHING FACILITIES.
Work Hygienic Practices:WASH WELL AFT HNDLG.GOOD INDUSTRIAL HYG PRACT
    SHOULD BE FOLLOWED-INCLUDES PREVENT EYE CONTACT,MIN SKIN
    CONTACT,INHAL.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:NP
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NP
Appearance and Odor:NP
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IF DISCARD IN PURCHASED FORM THIS PRODUCT WOULD
    NOT BE HAZ WASTE EITHER BY LISTING/CHARACTERISTIC.HOWEVER UNDER
    RCRA RESPONSIBILITY OF END-USER TO DETERMINE @DISPO TIME WHETHER
    MATL CONTAINING PROD/DE RIVED FROM PROD SHOULD BE CLASSIFIED ASHAZ
    WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.