LOCTITE CORP AUTOMOTIVE & CONSUMER GROUP -- LOCTITE PST PIPE SEALANT W/TEFLON  -- 8040-00F030031
<pre>=====================  Product Identification  =====================

Product ID:LOCTITE PST PIPE SEALANT W/TEFLON
MSDS Date:07/01/1992
FSC:8040
NIIN:00F030031
=== Responsible Party ===
Company Name:LOCTITE CORP AUTOMOTIVE & CONSUMER GROUP
Address:4450 CRANWOOD PKY
City:CLEVELAND
State:OH
ZIP:44128-4004
Country:US
Info Phone Num:800-321-9188 OR 216-663-3614(FAX)
Emergency Phone Num:216-663-3011
CAGE:08028
=== Contractor Identification ===
Company Name:LOCTITE CORP AUTOMOTIVE AND CONSUMER GROUP
Address:4450 CRANWOOD COURT
Box:City:CLEVELAND
State:OH
ZIP:44128-4004
Country:US
Phone:216-663-3011
CAGE:08028

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, MICA, MUSCOVITE
CAS:12001-26-2
RTECS #:VV8760000
Fraction by Wt: 15-20%
OSHA PEL:20 MPPCF
ACGIH TLV:3 MG/M3 RDUST; 9293

Ingred Name:OCTANOL, OCTYL ALCOHOL
CAS:111-87-5
RTECS #:RH6550000
Fraction by Wt: 10-15%

Ingred Name:POLYETHYLENE GLYCOL DIMETHACRYLATE	*93/1*
CAS:25852-47-5
Fraction by Wt: 10-15%

Ingred Name:HEXANOIC ACID, 2-ETHYL-, DIESTER W/TETRAETHYLENE GLYCOL
CAS:18268-70-7
RTECS #:MO7710000
Fraction by Wt: 10-15%

Ingred Name:ETHYLENE, TETRAFLUORO- POLYMER (POLYTETRAFLUOROETHYLENE),  
    PTFE, TEFLON
CAS:116-14-3
RTECS #:KX4025000
Fraction by Wt: 5-10%

Ingred Name:HEXAMETHYLDISILAXANE, SILICA REACTION PRODUCT  *93-3*
CAS:68909-20-6
Fraction by Wt: 3-5%
ACGIH TLV:10 MG/CUM

Ingred Name:CUMENE HYDROPEROXIDE
CAS:80-15-9
RTECS #:MX2450000
Fraction by Wt: 1-3%
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Ingred Name:ESSENTIAL OILS
Fraction by Wt: 1-3%

Ingred Name:METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 1-3%
Other REC Limits:200 PPM
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 1-3%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:BISPHENOL-A PROPYLENE OXIDE FUMARATE (POLYMER),POLYESTER   
    RESIN		*93-1*
CAS:39382-25-7
Fraction by Wt: 25-30%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (LAB ANIMAL): >5000 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:LUNG IRRITATION, GASTROINTESTINAL
    IRRITATION, NERVOUS SYSTEM & OCULAR EFFECTS. DERMATITIS ON
    PROLONGED CONTACT IN SENSITIVE INDIVIDUALS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: INTOXICATION, NAUSEA, HEADACHE,
    DIZZINESS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. KEEP CALM. INHALATION:
    REMOVE TO FRESH AIR. SKIN: FLUSH THOROUGHLY W/SOAP & WATER. EYES:
    FLUSH W/WATER FOR AT LEAST 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN AN INERT ABSORBENT. STORE IN PARTLY
    FILLED, CLOSED CONTAINER UNTIL DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 110F TO PRESERVE SHELF
    LIFE.
Other Precautions:AVOID CONTACT W/SKIN & EYES. DON'T USE FOR PROLONG
    PERIODS IN CONFINED AREA WITHOUT ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Ventilation:SUFFICIENT TO MAINTAIN VAPOR CONCENTRATION BELOW TLV
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F
Vapor Pres:<10
Spec Gravity:1.21
Solubility in Water:SLIGHT
Appearance and Odor:WHITE PASTE W/MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY ATTACK SOME THERMOPLASTICS
Hazardous Decomposition Products:TOXIC FLUORIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN ACCORDANCE W/FEDERAL, STATE &
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.