XEROX CORP -- 5760/5765/5790/DUROCOLOR 40 BLACK TONER, 6R843 -- 6850-00N078005
===================== Product Identification ===================== Product ID:5760/5765/5790/DUROCOLOR 40 BLACK TONER, 6R843 MSDS Date:04/25/1996 FSC:6850 NIIN:00N078005 === Responsible Party === Company Name:XEROX CORP Address:100 CLINTON AVE S City:ROCHESTER State:NY ZIP:14644 Country:US Info Phone Num:800-828-6571 Emergency Phone Num:714-422-2177;714-422-1230 CAGE:0E6G9 === Contractor Identification === Company Name:XEROX CORP Address:300 MAIN ST NO 27C City:EAST ROCHESTER State:NY ZIP:14645 Country:US Phone:800-828-6571; 800-351-2024 CAGE:0E6G9 Company Name:XEROX CORPORATION Address:100 CLINTON AVE SOUTH Box:City:ROCHESTER State:NY ZIP:14644-1877 Country:US Phone:800-828-6571/716-422-2177 CAGE:26921 ============= Composition/Information on Ingredients ============= Ingred Name:POLYESTER CAS:128781-91-9 Fraction by Wt: >90% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CARBON BLACK CAS:1333-86-4 RTECS #:FF5800000 Fraction by Wt: 2-5% OSHA PEL:3.5 MG/M3 ACGIH TLV:3.5 MG/M3 Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) CAS:13463-67-7 RTECS #:XR2275000 Fraction by Wt: <2% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST ===================== Hazards Identification ===================== LD50 LC50 Mixture:LD50:(ORAL,RAT) >5 G/KG Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:ACUTE:MINIMAL RESP TRACT IRRIT MAY OCCUR AS W/EXPOS TO LG AMTS OF ANY NON-TOXIC DUST. TOX:CHRONIC TONER INHAL STUDY, DEMONSTRATED NO LUNG CHANGE IN RATS IN LOWEST (1MG/M3) EXPOS LEVEL (I.E. LEVEL MOST RELEVANT TO POTNTL HUMAN EXPOS). VERY SLIGHT DEGREE OF FIBROSIS WAS NOTED IN 1/4 OF ANIMALS @ MIDDLE (EFTS OF OVEREXP) Explanation of Carcinogenicity:CARBON BLACK:IARC MONO ON EVAL OF CARCIN RISK OF CHEMS TO MAN, VOL 65, PG 24-27, 1995:GROUP 2B. Effects of Overexposure:HLTH HAZ:(4MG/M3) EXPOS LEVEL, WHILE SLIGHT DEGREE OF FIBROSIS WAS NOTED IN ALL ANIMALS @ HIGHEST (16MG/M3) EXPOS LEVEL. FINDINGS ARE ATTRIBUTED TO "LUNG OVERLOADING", GENERIC RESPONSE TO EXCESS AMTS OF ANY DUST RETAINED IN LUNGS FOR PRLNGD PERIOD. THIS STUDY WAS CONDUCTED USING SPEC TEST TONER TO COMPLY W/EPA (SUPDAT) Medical Cond Aggravated by Exposure:NONE WHEN USED AS DESCRIBED BY PRODUCT LITERATURE. ======================= First Aid Measures ======================= First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH SOAP AND WATER. INHALTION:REMOVE FROM EXPOSURE. INGESTION:DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF WATER. ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE OR FOAM. Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE. Unusual Fire/Explosion Hazard:TONER IS A COMBUSTIBLE POWDER. LIKE MOST ORGANIC MATLS IN POWDER FORM, WHEN DISPERSED IN AIR, IT CAN FORM EXPLOSIVE MIXTURES. ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP UP/VACUUM SPILLED TONER & CAREFULLY TRANSFER INTO SEALABLE WASTE CNTNR. SWEEP SLOWLY TO MINIMIZE GENERATION OF DUST DURING CLEAN-UP. IF VACUUM IS USED, MOTOR MUST BE RATED AS DUST TIGHT. CONDUCT IVE HOSE BONDED TO MACHINE SHOULD BE USED (SUPDAT) Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:NONE. Other Precautions:AVOID PROLONGED INHALATION OF EXCESSIVE DUST. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED. NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:NONE SPECIFIED BY MANUFACTURER. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health EFTS OF OVEREXP:TESTING PROTOCOL. TEST TONER WAS 10 TIMES MORE RESPIRABLE THAN COMMERCIALLY AVAIL XEROX TONER, & WOULD NOT BE FUNCTIONALLY SUITABLE FOR XEROX EQUIPMENT. SPILL PROC:TO REDUCE STATIC BUI LDUP. RESIDUE CAN BE REMOVED W/SOAP & COLD WATER. GARMENTS MAY BE WASHED/DRY CLEANED, AFTER REMOVAL OF LOOSE TONER. ================== Physical/Chemical Properties ================== Solubility in Water:NOT KNOWN Appearance and Odor:BLACK POWDER/FAINT ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE KNOWN. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:PRODUCTS OF COMBUSTION MAY BE TOXIC. AVOID BREATHING SMOKE. ==================== Disposal Considerations ==================== Waste Disposal Methods:WHEN DISPOSED, MATL IS NOT HAZ WASTE ACCORDING TO FED REGS 40 CFR 261. HOWEVER, STATE & LOCAL REQUIREMENTS MAY BE MORE RESTRICTIVE. THEREFORE, CONSULTATION W/APPROP FEDERAL, STATE & LOCAL WASTE DISP A UTH IS ADVISED. INCIN ONLY IN CLSD CNTNR. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.