AERVOE PACIFIC CO INC -- (17A) MARKING PAINT-ALL COLORS, 17A -- 8010-00N059492 
=====================  Product Identification  =====================

Product ID:(17A) MARKING PAINT-ALL COLORS, 17A
MSDS Date:01/06/1992
FSC:8010
NIIN:00N059492
=== Responsible Party ===
Company Name:AERVOE PACIFIC CO INC
Address:1198 SAWMILL RD
City:GARDNERVILLE
State:NV
ZIP:89410
Country:US
Info Phone Num:408-295-7390
Emergency Phone Num:800-424-9300(CHEMTREC)
Preparer's Name:MIKE A TRAQUINA
CAGE:AERVE
=== Contractor Identification ===
Company Name:AERVOE PACIFIC CO INC
Address:1198 SAWMILL RD
Box:City:GARDNERVILLE
State:NV
ZIP:89410
Country:US
Phone:702-782-0100
CAGE:AERVE
Company Name:AERVOE-PACIFIC CO INC
Address:1198 SAWMILL RD
Box:City:GARDNERVILLE
State:NV
ZIP:89410
Country:US
Phone:702-782-0100
CAGE:0UPL1

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS
CAS:8052-41-3
OSHA PEL:100 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

Ingred Name:VM & P NAPHTHA
CAS:64742-89-8
OSHA PEL:500 PPM (MFR)
ACGIH TLV:300 PPM (MFR)

Ingred Name:TOLUENE (SARA 313) (CERCLA) LD50(ORAL,RAT):258 MG/KG
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 16%
OSHA PEL:200 PPM
ACGIH TLV:S, 50 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:HEXANE (N-HEXANE) (CERCLA) LD50(ORAL,RAT):287 MG/KG
CAS:110-54-3
RTECS #:MN9275000
Other REC Limits:NOT RELEVANT
OSHA PEL:500 PPM
ACGIH TLV:50 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:XYLENE LD50(ORAL,RAT):30 MG/KG
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 2%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT

Ingred Name:PROPANE, 2-METHYL-; (ISOBUTANE)
CAS:75-28-5
RTECS #:TZ4300000
OSHA PEL:600 PPM (MFR)
ACGIH TLV:582 PPM (MFR)

Ingred Name:BUTANE; (NORMAL BUTANE)
CAS:106-97-8
RTECS #:EJ4200000
OSHA PEL:800 PPM
ACGIH TLV:800 PPM

Ingred Name:COATING VOLATILE ORGANIC COMPOUND:3.66 LBS/IMP GAL, 4.71
    LBS/US GAL, 565 GMS/LTR
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION:ANESTHETIC. IRRITATION OF
    THE RESPIRATORY TRACT OR NERVOUS SYSTEM DEPRESSION-CHARACTERIZED BY
    HEADACHE, DIZZINESS, NAUSEA OR POSSIBLE UNCONSCIOUSNESS. SKIN/EYE
    CONTACT:PRIMARY IRRITATION. P ROLONGED OR REPEATED CONT TO SKIN MAY
    CAUSE DERMATITIS. EXERCISE DUE CARE.MAY CAUSE BURNING
    SENSATION(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SKIN ABSORPTION:MAY CAUSE IRRITATION OR BURNING
    SENSATION. INGESTION:NOT APPLICABLE. TOLUENE APPEARS ON THE NAVY
    LISTING OF OCCUPATIONAL CHEMICAL REPRODUCTIVE HAZARDS. SEEK
    CONSULTATION FROM APPROPRIA TE HEALTH PROFESSIONALS CONCERNING
    LATEST HAZARD LIST INFORMATION AND SAFE HANDLING AND EXPOSURE
    INFORMATION .
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE AND
    RESTORE BREATHING, SEEK MEDICAL ATTENTION. SKIN:WASH AFFECTED AREA,
    REMOVE CONTAMINATED CLOTHING, SEE PHYSICIAN IF ANY IRRITATION PERS
    ISTS. EYES:FLUSH IMMEDIATELY WITH WATERFOR AT LEAST 15 MINUTES-TAKE
    TO A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:-26F,-32C
Lower Limits:0.7%
Upper Limits:9.5%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . WATER SPRAY MAY BE INEFTIVE, BUT MAY BE USED TO COOL CNTNRS
    EXPOSED TO HEAT/FIRE TO PVNT PRESS BUILD UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
    BUILD UP OF PRESSURE FROM EXTREME HEAT OR FIRE. AEROSOL SPRAY IS
    EXTREMELY FLAMMABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION:FLAMES, SPARKS,
    STATIC ELECTRICITY AND ELECTRICAL. VENTILATE AREA AND SOAK UP WITH
    INERT ABSORBENT USING NON-SPARKING TYPE TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT STORE
    OR USE NEAR HEAT, SPARKS OR FLAME. DO NOT GET IN EYES. DO NOT
    BREATHE VAPORS. AVOID SKIN CONTACT.
Other Precautions:DO NOT TAKE INTERNALLY. SMOKING WHILE USING THIS
    PRODUCT MUST BE STRICLY PROHIBITED. IN ADDITION TO ALL OTHER
    HAZARDS AND PRECAUTIONS-DUST FROM SANDING THE DRY PAINT FILMS
    SHOULD BE TREATED AS A NUISA NCE DUST WITH TLV OF 10 MG/CUBIC
    METER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OUTDOORS:MFR RECOMMENDS A NIOSH/MSHA APPROVED
    PARTICULATE FILTER TO REMOVE ANY AIRBORNE OVERSPRAY. IN RESITRICTED
    AREAS WITH POOR VENTILATION AND CLOSE TO THE TLV A NIOSH/MSHA
    APPROVED RESPIRATOR WITH  ORGANIC VAPOR CARTRIDGE IS RECOMMENDED.
Ventilation:ALL APPLICATION AREAS SHOULD BE ADEQUATELY VENTILATED IN
    ORDER TO KEEP THE INGREDIENTS BELOW THEIR EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES ARE RECOM TO (SUPDAT)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EMER EYE WASH & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .  IMPERVIOUS APRON IS RECOMMDED TO PRVNT SKIN
    CONT.
Work Hygienic Practices:AVOID PROLONGED OR REPEATED CONTACT. DO NOT
    BREATHE VAPORS. WASH CONTAMINATED CLOTHING PRIOR TO RE-USE.
Supplemental Safety and Health
PROT GLOVES:PREVENT SKIN CONTACT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:-10F,-23C
Vapor Density:HVR/AIR
Spec Gravity:0.8 (H*2O=1)
Evaporation Rate & Reference:FASTER/N-BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID WITH SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.